Aluminum is a soft, silvery-white, ductile, durable, lightweight metal. It's nonmagnetic, nonsparking, easily formed, machined, and cast.

Pure aluminum has a low tensile strength, but when combined with thermo-mechanical processing, aluminum alloys display a marked improvement in mechanical properties, especially when tempered.Aluminum alloys form vital components of aircraft and rockets as a result of their high strength-to-weight ratio.

1. Aluminum plate, sheet, foil, strip, ribbon
Standards: ASTM B209, 2024, 5052, 5083, 5086, 6061, 6063, 7075
Size available:
Thick 0.3mm ~ 80mm * Wide 3000mm max * Long 6000mm max

2. Aluminum round rod, rectangular bar
   Standards: ASTM B211, 2024, 5052, 5083, 5086, 6061, 6063, 7075
Size available: Outer Diameter 3mm ~ 350mm * Long 6000mm max

3. Aluminum wire
Standards: ASTM B211, 2024, 5052, 5083, 5086, 6061, 6063, 7075
Size available: Outer Diameter 0.05mm min

4. Aluminum tube, pipe
Standards: ASTM B483, 2024, 5052, 5083, 5086, 6061, 6063, 7075
For seamless, size available:
   OD 4-115mm * Wall thick 0.2~8mm * Long 15000mm max
For welded, size available:
   OD 80~ 650mm * Wall thick 1 ~ 10mm * Long 15000 max

5. Featured Aluminum alloys
7075 aluminium
6. Typical sputtering target
 
High purity Aluminum sputtering target

Ti-Al target:
Titanium-Aluminum (TiAl alloy) sputtering target
Composition: Ti: Al   75:25 at%, 65:35 at%; 50:50 at%; 35:65 at%
Shape: planar (disc & rectangular), rotatable
 
AZO target:

Aluminum Zinc Oxide (AZO)

AZO is used for making transparent conductive coatings and the typical ZnO to Al2O3 ratio by weight is 98:2. AZO is regarded as an alternative to ITO and probably take the place of ITO in the future for the consideration of the cost and the limited supply of indium.