Axial type MPA-Metallized Polypropylene film Capacitor (MPA)

CBB20-A

*Construction

Polyester film dielectric with vacuum-evaporated metal electrodes, axial leads of tinned wire are electrically welded to the contact metal layer on the ends of capacitor winding out wrapped with Mylar tape and ends sealed and ends sealed with epoxy resin.

*Feature

1. Non-inductive construction

2. Self-heating

3. High property moisture resistance

4. High capacitance value available and compact size

*Application

Coupling decoupling by-passing and timing circuit. Automatic control system, communication equipment. Charging/discharging lighting noise suppression and frequency modulation

.

*Specification

1. Reference standard: GB/10190 (IEC60384-16)

2. Temperature range: -40~105°C

3. Climatic Category: 40/85/56

4. Rated Voltage: 100Vdc,250Vdc,400Vdc,630Vdc

5. Capacitance Range: 0.1μF-68μF

6. Capacitance Tolerance: ±2%(G);±5%(J);±10%(K)

7. Voltage Proof:1.6UR(5s)

8. Dissipation Factor:≤0.1%(20°C 1KHz)

9. Insulation Resistance: ≥100000MΩ, C≤0.33μF,≥30000MΩ; C>0.3μF;20°C,100v,1min

10. Life Test: 1000hours at 85°C at 150% Rated Voltage