Support free switching of joint coordinates and Cartesian coordinates;
In the effective processing scope, supports any space two arbitrary points, walks a straight line, the space three spots, walks an arc;
Using AFDX05 special motion control chip, one can control 30 axis linkage at most;
Automatically generate G code, support for standard G code, G00, G01, G02, G03, G04 and so on;
Macro command programming, support SIN, COS, TAN, ASIN, ACOS, ATAN, SQRT and other functions;
3D circular interpolation; spatial arc interpolation;
Eight axis linkage;
Offline operation;
Teach programming;
Manual programming;
The old version of the hardware supports U disk read and write, and the new version of the hardware supports SD card read and write, or serial communication or none;
Yes, you can take step drive or servo drive;
Point movement function;
Four teaching speed: high speed, medium speed, low speed, micro motion;
The old version of the hardware supports connecting 4 incremental encoders, and the new version of hardware does not support this functionality;
24 input port, 12 way output port, or 36 way input port, 20 way output port;
The standard configuration is to control 1 to 8 motor movements; the custom can control up to 30 motors at most;
Input and output port test function;
Keyboard keyboard test function;
The power supply is 24V DC power supply;
The biggest disadvantage of our system is that there are 100 processing files, each processing file with at most 300 to 500 lines of G code statements. Efforts are being made to solve the problem of processing large files.
The system is constantly revised and perfected, and you should inquire about the latest changes.
Yunshan CNC constantly strive to design and produce products with the best performance price ratio!
The above quotation does not include the ticket, if has not been clear, please add wants to relate. Or through the following contact information:
Tel: 15000648830, Hu Gong