Wheel Alignment (ML96-3D)

Description

Characteristics of 3D Wheel Alignment:

1.3D cameras alignment - Based on the car and not influenced by the platform

2. Measurement system - equipped with double digital cameras and four target disk, supplying revolutionary measurement mode

3. Target disk - There is no electronic components and connection lines on the target disk, so the wheel alignment will not has a component failure problem.

4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration

5. Measurement progress - no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth

6. Software system - Easy to operate, complete conventional basic parameters including two minutes, significantly faster than conventional aligners

7. Daily Maintenance - Easily maintenance and download freely upgrade for the model data.

Standard Configuration:

Cabinets, camera mounted stent economic criteria, Lenovo or HP branded computers (Liquid Crystal Display), Canon printers, target disk, Pylon, brake holder, steering wheel holder, wedge-shaped pads, corner plate, corner plate blocks of the transition.

Software Features:

1. Basic Functions:

Parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out, Set back, Thrust angle

2. Extension Functions: Axis deviation measurement, wheel deviation measurement, animation, single-round measurements, the vehicle lift measurement function, steering wheel, align the features, positioning platform for testing the level of degree the amount of features.