Introduction:  

Yugong Brand Machinery has introduced into advanced technology,invented SJM5 flat-dies pellet mill machine.

 

Waste sawdust pellet molding machine can produce a special coal (High efficiency fuel) with many kinds of agriculture waste as raw material, such as corn straw, rice hull, peanut hull, sawdust and so on ,also the material own low adhesion rate and that difficult to forming. 

The heat quantity caused by burning this fuel is equivalent to coal, and moreover, the quantity of carbon dioxide in smoke dust, especially the quantity of sulfur dioxide, reduces extremely. Also the cost is much lower than coal .The final product mainly used as fuel in furnace,boiler and power plant, the clinker after burning was directly used as fertilizer.                                                   

We've introduced into advanced technologe from abroad.Through continuous improvement,the machine could meet production needs of different countries.We've received a lot of praises from cousumers around the world which means that the molding machine is popular worldwide.  

Compared to ring-dies briquetting machine---The ring dies briquetting machine is restricted by ring diameter,its roller can not be enlarged enough, roller bearing room is smaller, so the assembly bearing is not strong enough to withstand pressure,so the problems come to being:bearing's less standing ability leads to frequent repair.

Characteristic:  

1.The mould & rollers are made from special alloy and processed by special method & treatment,

   so with extreme durability.Successfully overcomed the poor resistance of traditional mould &

   roller.

 

2.It adopts screw-center adjusting pressure structure,the pressed rollers' gap can be  adjusted

   smaller or bigger,so it can meet different materials' demand and make sure the briquetting effect.

 

3.Main machine equippmed with specially desinged screw conveyor which has speed control device,

   thus can realize feeding steadily and cleanly for all kinds of raw material.

 

4.Main machine,screw conveyor and speed control device can be operated through one combined

   control panel.Which is more convenient and labor-saving.

  

5.With 1 year warranty.

 

As a professional machiney manufacturing factory, we believed that success comes to a great service.
Sincerely hoping that both sides could cooperation happily!