| ●Spindle Motor |
1.5kw air-cooled spindle motor |
| ●Machine body |
Iron cast |
| ●Drive mechanism |
German imported ballscrew，Linear guide on y axis |
| ●Working dimensions(X x Y x Z) |
400 x400 x 50mm |
| ●Body dimensions |
700 x 700 x 600mm |
| ●Max. Feeding height |
60mm |
| ●Cuting thickness of material |
<20mm |
| ●Driver type |
Stepper motor |
| ●Blade diameter |
3.175mm,4mm,6mm (optional) |
| ●Relative humidity |
30% - 75% |
| ●control system |
DSP control system |
| ●Resolution |
0.01mm |
| ●Motion Speed |
0-10000mm/min |
| ●Max engraving speed |
7,000mm/min |
| ●Rotating Speed of Spindle |
0~2,4000rpm |
| ●Dictate Formate |
G code, HPGL,NC |
| ●Operating voltage |
AC220/50Hz |
| ●Support soft ware |
Type3 original with dongle or Wentai software/ARTCAM/CAXA |
Application:
This machine can be used for stone, Brass and AL processing, mold manufacturing, wood processing, craft manufacturing, indoor decoration cutting, sign and mark manufacturing, acrylic board processing, as well as stamp and PCB cutting．
