Stainless steel cut wire shot production standards:

We strictly according to Japan JIS standard production stainless steel wire ingredients to production.

 

The specification of stainless steel cut wire shot:

0.6mm 0.5mm 0.4mm 0.3mm 0.2mm(304,430,410)

 

 

Stainless steelcut wire shot, with its main technical indices:

 

Product		Stainless steel shot
Chemical composition	（C）	304 austenitic size (304 Austenite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,manganese (Mn) < 2%, 430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.15%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%, 410 Type Martensite (410 Martensite Type) : carbon (C) < 0.15%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1% Note: according to can be based on user needs, providing other chemical composition
	（Mn）
	（Ｓi）
	(Cr)
	(Ni)
	（S）
	（P）
Average hardness (500g load were determined under)		41～59HRC(388～509HV)
Hardness deviation		Maximum deviation scope for + 1.0 HRC or + 40HV
Microstructure		Longitudinal (Deformed Pearlite) horizontally (Deformed Pearlite)
Density		7.8/cm3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: according to user requirement, offer other chemical composition.

 304 austenitic size (304 Austenite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, Ni (Ni) = 6 ~ 10%, silicon (Si) < 1%,

Manganese (Mn) < 2%

 430 Type ferritic (430 Ferrite Type) : carbon (C) < 0.25%, chromium (Cr) = 16 ~ 18%, silicon (Si) < 1%, manganese (Mn) < 1%

 410 Type Martensite (410 Martensite Type) : carbon (C) < 0.25%, chromium (Cr) = 11 ~ 13%, silicon (Si) < 1%, manganese (Mn) < 1%

 

 

 

 

Stainless steel cut wire shot of application:

Cleaning: peen-forming cleaning, body.they, non-ferrous alloy, copper alloy, magnesium alloy, zinc alloy die casting cleaning, stainless steel castings peen-forming cleaning, not rust

Steel forgings peen-forming cleaning, forgings body.they castings rust-removing stainless steel plate cleaning, stainless steel material is clean, stainless steel plate clean, non-ferrous items such as table

Face the whole lighting light deburring processing, can enhance workpieces the anti-fatigue, corrosion resistance and cover casting surface defects, make product surface increase

White and bright.

Derusting: peen-forming derusting, shot peening derusting, casting derusting, forging steel derusting, forging except rust oxide skin, steel derusting, h-beam derusting, steel structure

Derusting.

Conslidation: stainless steel parts peen-forming aggrandizement, heat-treated pieces shot peening.

Shot peening: colored aluminum, copper, magnesian zinc shot peening, die-casting stainless steel shot peening.