Vacuum Plating Waterborne UV Oil
WUV-DM
I. Product Description:
The paint is suitable for use on vacuum aluminum plating, metal, plastic (ABS/PC/PS/PMMA/OPP), wood and other materials, good adhesion, good leveling, high hardness, good construction, good interlayer adhesion, good plating, fast light curing speed; as a primer or topcoat can be used, the construction method can be sprayed or rolled; the use of water as a diluent, the emission of environmentally friendly, non-harmful to workers. Washing powder solution or alcohol can be used for mechanical cleaning.

Second, product specifications:
Appearance: translucent milky liquid
Active ingredient: 33-35%.

Exposure intensity: 800-1200mj/cm2
Viscosity: 20s-30s

Third, the use of methods and construction conditions:
a) Pre-treatment of workpiece - spraying - IR (60 ℃ 6 min) - exposure (800-1200mj/cm2) - coating - spraying - IR - exposure
(b) the product can be used for spraying ethanol or water dilution, dilution ratio depending on the spraying needs to be added
(c) curing conditions for 3000W or more power UV lamps, lamps and illuminated objects within a distance of 10CM fastest curing speed and best results, greater than this distance, then the light time needs to be extended appropriately, for multi-faceted workpiece should be used to irradiate the multi-angle light curing UV machines

Four [product testing

Testing items

Testing Methods

Judgment

Detection Result

Adhesion

Knife cut 100 cells 1mm small cells

Grade 1

5B

Hardness

Mitsubishi Pencil

2H

2H

RCA Paper Tape Test

Test RCA/175g

Passed with no penetration of the paint film over 300 turns.

Passed

Alcohol resistance

99.5% alcohol x 500g

No obvious peeling or softening of the plating layer is OK.

Passed

Salt spray resistance

48H salt spray test 5% NaCI solution

No change in test appearance, 100 grams OK

Passed

Cold and heat shock

80℃×30min-40℃×30min 16 cycles

No change in appearance, 100 grams OK

Passed

Resistant to sunscreen

80℃80%RH×24h(SPE-30)

No change in appearance, OK

Passed

Boiling resistance

100℃×1H boiling water test

No change in appearance, 100 grams OK

Passed

V. Storage and transportation precautions:

This product is packed in iron drum or plastic drum, specification is 20-200kg.
Please take sufficient labor protection measures when using this product, if accidentally splashed on the skin and eyes, please flush with water, serious cases need immediate medical attention.
Room temperature (-10-30 ℃), light storage period of up to 6 months, storage should be avoided during the period of bright light, open flame heat source, etc.
This information is for reference only, the specific operation depends on the environment.