2010 THE HOTSELLING CELLULITE REDUCING MACHINE

Applications
1.fat deposits and cellulite reduction
2.Body shaping
3.Balancing skin and increasing blood circulation
4.Body Contouring & Cellulite Treatment

Features and Advantages
1.LED&Cavitation
Cavitation is a non invasive method that works with controlled high frequency waves that generate micro bubbles. Such micro bubbles implode due to partial pressure changes and the fat cells in localized areas disintegrate. These fat cells turn into a liquid substance (diglycerides) which is eliminated through the lymphatic system and urine.
LED Beauty helps to vitalize cells, enhance blood circulation, better oxygen supply, strengthen skin tissues and improve metabolism and excretion by using natural light wave that transmits into skins and activates light perception cells where energy is absorbed by hemoglobin, proteins, carbohydrates and fats to better your skins.

2.Multi-polar Radio Frequency
Multi-polar RF(Fractional focus RF) technology is a revolutionary system using a sophisticated algorithms to control the polarity of each pole and the frequency to achieve variable energy focus in different resulting in visible clinical results from the first treatment.
Multi-polar RF technology is an innovative system maximizing the benefits of RF technology. It is the fastest and most safe RF system on the market.



Technical Specification
Application ultrasound low frequency wave generator (cavitation) and fractional RF
Cavitation
Cavitation applicator One applicator with LED for arm and body with 1 piece of transducer: 1 flat
Applicator material Stainless Steel
Work Frequency 32KHz
Transducer’s diameter 5.0CM
Absorbed Power Max 80W
Output Power 3.0W/CM2
Radio Frequency
RF applicator One applicator with 4 pixel for face(pixel: 0.7x0.7CMx4)
One applicator with LED and 6 pixel for body (pixel: 0.7x1.5CMx4, 1.5x1.5CMx2)
Applicator material Stainless steel
Work Frequency 1.0Mhz
Absorbed Power Max 50W
Output Power 45W

Power Supply 110V-120V/220V-240V, 50/60Hz
Fuse 2 fuses 5x20 – 250V – 5A F
Max actual power noise 3W
Elastic Working pressure 0.6 Kpa/cmq per 40x10 E3 cycles/sec.
Electronic control system Retroaction controls of working parameters, quickness of pressure-acoustic propagation, stable frequency, temperature and deviation from the point of maximum output
Treatment Time From 5 to 30 minutes
Programs Personalized regulations
Parameters Setting Ultrasound type emission, time, power
Safety Class CE
Commands Selection through touch-buttons
Visualization Graphic Display 5.6’’ touch screen
Operating Temperature From 10 to 35℃
Operation Relative Humidity From 30 to 75%
Operation pressure 500 Mbar to 1060 Mbar
Size of machine CM
Packing size
Net Weight
Gross Weight
Warranty 12 months
Mark CE