JST-W08C mechanical thermostat
Main functions and features:
1.Indoor temperature setting
2.Cooling/heating mode choice
3.The temperature setting, convenient, set by knob
4.Switch using solenoids, comfortable, and not easy to damage
5.Open/close control and speed regulation
6.Can manual control system operation and fan speed
7.Can be applied to the control valve or double tube of valve and draft fan
8.Can control a rev/stop valve,To control the temperature, temperature control by fan, in some cases can be continuous operation or fan with a thermostat cycles
9.Dual metal diaphragm inflatable membrane box can be required to ensure accurate temperature control
10.Elegant chic modelling, make the thermostat is more perfect and installed in indoor environment, particularly suitable for the office buildings and hotels, restaurants in the room
11.The thermostat directly installed in the wall or the junction box.
All types of thermostat have heat premonition, the heat premonition can further improve hot cold temperature control.

Installation method and the matters needing attention:
1, use small cross-screwdriver to loosen the screw on top thermostat, then the shell, the floor with equipped screws want to place the thermostat housing at bottom. According to the electrical wiring must correct wiring, don't hook into the water and mud etc. Within the thermostat, Otherwise it will cause damage to the device.
2, thermostats must be installed in ventilated metope, ground for 1.5 meters high distance, to measure the average temperature, avoid to be installed in the outlet temperature, sunshine radiate heat or cold (place of) source.
3, indoors decorate but haven't been installed on the thermostat, under the situation of the thermostat s ested wrapping cloth, lest dirt into damaged the thermostat.
4, when installation size can be installed in a 75*105*48mm standard junction box.

* thermostat Scope: 10 ℃ ~ 30 ℃
* range: 20 ℃< 1 ℃
* temperature elements: the precision of the metal film box
* electric parameters: the thermostat 2A220VAC ± 10%, 56/60Hz
                       three speed switch: 3A220VAC ± 10%, 50/60Hz