-
Insertion Loss: less 0.5dB
-
Frequency Response: 0-3dB range in 20Hz to 12MHz
-
CMRR: 58dB @ 1MHz
-
Differential phase: less than 2 degrees
-
Differential gain: less than 2%
-
S/N ratio: >60dB
-
Ground loop circuit isolation: >90dB and >50Hz
-
DC loop resistance: 18 ohms/100m
-
Isolation Voltage: 600VDC (Min)
-
Input Resistance: 75 ohm
-
Output Resistance: 75 ohm
-
Insulation Resistance: 100M ohm
-
Build in external paasive isolation circuit with isolation transformer,
DC video input signal saturation rejection, line termination for 'Hum Bar' rejection, common & differential mode noise LPF filter
perfect to DVR to immunity interference, for extra interference rejection(UST100GLIB)
-
Two 165mm mini cable with BNC Female and BNC-Male input / output (for isolated equipment) connectors
Passive, no power required.
-
Prevents video-signal distortion caused by video ground loops.
-
Eliminates picture tearing, cross talk and rolling.
-
Prevents power cables laid by others interfering with the CCTV system.
-
Built in TVS (Transient Voltage Suppressors) for surge protection: 12V rms
-
Dimension:
63mmx36mmx21mm with two 165mm mini cable -BNC male and female connectors
-
Material: PVC Black-HT7000GLIB HT7001GLIB