1. BZC600LCCA truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary table drilling rig.
2. The truck chassis adopts the special crane chassis and the main drive system, the transfer case, gearbox, double hydraulic winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of truck engine transfer to PTO, and then drive drilling rig.
5. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
6. The rig can carry out down-the-hole hammer drilling with Air Compressor.
7. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.   

Technical parameter
 Drilling depth（M）    500-600
 Drilling diameter（mm）    200-500
 Speed of turntable（r/min）    117；102；60；38；22；13；16(reverse)
 Torque of turntable（KN.m）    5.4----50
Single rope lifting capacity of main winch(KN)    50
Maximum lifting capacity of main winch(KN)    300
Single rope lifting capacity of assistant winch(KN)                                 75
Single rope lifting capacity of assistant winch(KN)    300
 The lifting capacity of hook（KN）    300
 Bearing capacity of drilling tower (KN)    300
 The height of drilling tower (mm)    15000