125K ans 13.56 Mifare combination card reader

Model:	JAT HM6060
Brand:	access-controller
Origin:	Made In China
Category:	Security & Protection / Access Control System
Label:	125K proximity reade , RFID reade , mifare card reader
Price:	-
Min. Order:	-

Inquire Now

Product Description

Mifare +125K combination card reader

Introduction

HM6060 is mifare smart IC card and125K proximity card combination Proximity card reader. It reads all 125K proximity card identification number, and reads customized sector data inside mifare card , it is high secure system as the protection code of mifare smart card sector is under customer control. The reader is with Wiegand34 interface for mifare and wiegand interface for 125K proximity , it is a good solution to update access control system with normal EM125Khz card to 13.56MHz smart Mifare card technology, with this design, the existing 125K proximity card and database can be used smoothly, and new released card can be become into smart mifare cartds.

Model Name: HM6060

Wiring:

Red : Vin
Black: Gnd
Green: Data0
White: Data1
Yellow: Buzzer
Blue: LED

Specification

waterproof, Full potting for outdoor access control system
support card 125Khz	All 125kHz proximity card, fobs
support card 13.56MHz	Mifare Ultralight 512-bit EEPROM/Mifare Classic 1K,4K,8K bytes memory
Power requirements	9-15VDC at 150 mA, A linear regulator is recommended
interface	wiegand34 for mifare and Wiegand for 125K
Reader range	mifare 4-10cm ; 125K proximity 5-10cm
Frequency	125KHz
Operation temperature	-30 C to +60 C
operationg humidity	5%-95% relative humidity non-condensing
Audio/Visual Indication	Green & Red and Buzzer signal output
Dimension	76W x 123H x 23D ( mm )
cable length	250mm
Weight	200 gram

LED/Buzzer function description

LED function: The LED color is normally in RED. It starts with 2 green flashes on power up the reader and remains RED. When a RFID proximity card is presented to the reader, The LED will momentarily flash green, this indicates that the card was read properly by the reader. When the LED control signal is activated, the LED changes to green. The LED control signal is provided by the panel to control the reader LED state.

Beeper Function: Power up the reader, the beeper will activated 2 times. When a RFID proximity card is presented to the reader, a short beep will be emitted. This indicates that the card was read properly by the reader.

Buzzer control line : when it is activated by low, buzzer will sound continually till the line is released to high by access controller or control panel.

Green LED control line: when it is activated by low, Green LED will be on till the line is released to high by access controller or access control panel.