Specification:
bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment , easy and safe to operate

Main parameter

Max.volume of moulded product

2000ml

Max.product capacity

1600PCS/H

Max.Heating power

20kw

Pressure of air supply

2.5mpa

Max.mould dimension

20*35*38cm

Max.shifting mould dimension

17cm

Center distance between two bottles

min9cm   max20cm

Max.stretched length

35cm

Weight

1200kg

SizeMainmachinine

160*60*161cm

Oven

187*63*145cm