FE1/4X10(100)BaseT converter adopts telecom line (E1 or E1 transmitting network such as PDH, SDH, microwave, etc) to extend Ethernet. It converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it is efficiently and effectively used the spared bandwidth of telecom providers, it saves the networking cost and improve the efficiency and can be used immediately. The outstanding feature is supporting 4 Ethernet interfaces with VLAN function.

1. Technology Characteristics of FE1/4*10(100)BastT

Support Ethernet data transmitting transparently or according to timeslots in E1 line; bandwidth ranges from 64Kbps-2048Kbps.
Support 4 auto-negotiate and full/half duplex Ethernet interfaces, Support MDI/MDI-X auto-sensed, support intercommunicate and VLAN division between 4 Ethernet interfaces, support VLAN transparent transmission.
Support network management function, able to supervise the working status.
Support data filter at local side
Synchronously provide 75 unbalance /120 balance E1 port

2. Interface Parameters of FE1/4*10(100)BastT

2.1 E1 Interface:
Fully comply with ITU-T G.703G.704
Code Pattern: HDB3 code
Rate: 2048Kbps50ppm
Interface: 75 BNC / 120 RJ45
2.2 Ethernet Interface:
Fully comply with IEEE 802.32000specifications
Rate: 10Mbps or 100Mbps
Interface typeRJ45

3. General characteristics of FE1/4*10(100)BastT

Dimension: 220*175*35 mm
Net weight1000g
PowerAC176V~264V(DC-36 ~ -72V optional
Power consumption: <5W
Environment temperature: 0-50

4. Packing List of FE1/4*10(100)BastT

FE1/4X10(100)BaseT protocol converter
One Power cord (Note : -48v no with power cord)
Two BNCs Coaxial Connector
Manual book

3-5 business days
3000pcs per month
T/T in adva