EOP E1/Ethernet converter, known as Net bridge, adopts telecom line (E1 or E1 transmitting network such as PDH, SDH, microwave, etc) to extend Ethernet.

EOP E1/Ethernet converter complies with international standard at each layer (G.7041, G.7042, G.7043, G.8040).The EOP E1/Ethernet converter is able to intercommunicate with devices from other factories following the same standard protocols. The device not only offers perfect alarm/status indicator for E1 and Ethernet, but with advance management function such as Ethernet data stream statistics etc. This EOP E1/Ethernet converter is with high integration, low consumption, stable capability and easy employ.


1. Technology Characteristics of EOP E1/Ethernet converter

Comply with ITU-T standard protocol
GFP-F encapsulation scheme: G.7041
Virtual concatenation (VCAT) and link capacity adjustment scheme (LCAS): ITU-T G.7042
Ethernet mapping to nxE1 scheme G.7043
Ethernet mapping to E1 scheme: G.8040
Support 4 10M, 100M and full/half duplex Ethernet interface, support parallel and across Ethernet cable, support intercommunicate between 4 Ethernet and VLAN division, support VLAN transparent transmission under intercommunication status.
Support E1 circuit loop back test function
Support network management function, able to supervise the working and device status.
Support local data filter function


2.Interface Parameters of EOP E1/Ethernet converter
2.1 E1 Interface:
HDB3 code
Coding rate: 2048Kbps50ppm
75 physical interface user BNC coaxial connector, 120 physical interface use RJ45 connector
2.2 Ethernet Interface:
Rate: 10Mbps or 100Mbps
Interface typeRJ45

3. General characteristics of EOP E1/Ethernet converter
Dimension: 220*175*35 mm
Net weight1000g
Power220V20%-36 ~ -72V
Power consumption: <5W
Environment temperature: 0-50

4. Packing List of EOP E1/Ethernet converter
One EOP E1/Ethernet converter
One Power cord (Note : -48v no with power cord)
Two BNCs Coaxial Connector
Manual book

3-5 business days
3000pcs per month
T/T in adva