Introduction:

User guide in english : http://shop.avrvi.com/files/jtagisp-v2.5-en.pdf

This AVR JTAG ICE + AVRISP ISP programmer 2in1 provides the users a highly-flexible, low-cost Atmel AVR design and debug tool. It's operated by AVR Studio development software. When it in JATG ICE mode, it's recognized as standard AVR JTAG ICE. When it in ISP programmer mode, it's recognized as AVRISP/STK500 ISP programmer. The AVR ISP programming supports all AVR devices. The unit is compatible with original AVR JTAG ICE and STK500/AVRISP downloader. The AVR Studio software can be downloaded from Atmel's website.

AVR JTAG ICE allows access to all the powerful features of the AVR microcontroller. All AVR resources can be monitored when deb ing the firmware: Flash memory, EEPROM memory, SRAM memory, Register File, Program Counter, Fuse and Lock Bits, and all I/O modules. AVR-JTAG also offers extensive On-chip Debug support for break conditions, including break on change of Program memory flow, Program memory Break Points on single address or address range, and Data memory Break Points on single address or address range.

AVR ISP feature allows user for programming almost all AVR devices in system.

Features:

• Works with Atmel AVR Studio 4 IDE software. Recognized as STK500/ISP and JTAG ICE devices.
• JTAG ICE allow user to debug the firmware which is running in the target chip. User is able to step through the C or Assembly source code line by line in the AVR Studio. Because it is not a software simulation deb er, so that debug the in-circuit firmware become handy via JTAG interface.
• Both USB and RS232 can be used, when use USB, you need to setup driver. And when use rs232 external power is needed DC 7~9 v , in the center is VCC.
• 4 kinds of Protection circuits can ward the Programmer & Emulator and your board out of be damage.
• The JTAG ICE or AVR ISP can be Automatic Identification , so you need not use squid cable for switch, just place the cable to your 10 PIN JTAG or ISP interface smoothly.
• 2 in 1 feature gives use a flexibility and convenience when doing development.
• and more

Supported ISP Device:

The following devices are supported, (1)All low voltage versions of the devices in this column are also supported.

Classic	Tiny	Mega (1)	Other
AT90S1200 AT90S2313 AT90S/LS2323 AT90S/LS2343 AT90S/LS2333 AT90S4414 AT90S/LS4433 AT90S/LS4434 AT90S8515 AT90S/LS8535	ATtiny12 ATtiny13 ATtiny15 ATtiny22 ATtiny2313 ATtiny24 ATtiny25 ATtiny26 ATtiny261 ATtiny44 ATtiny45 ATtiny461 ATtiny48 ATtiny84 ATtiny85 ATtiny861 ATtiny88 ATtiny167	ATmega8 ATmega16 ATmega32 ATmega48 ATmega48P ATmega64 ATmega88 ATmega88P ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega1284P ATmega16HVA ATmega161 ATmega162 ATmega163 ATmega164P ATmega165 ATmega165P ATmega168 ATmega168P ATmega169 ATmega169P ATmega323 ATmega324P ATmega325 ATmega325P ATmega328P ATmega329 ATmega329P ATmega644P ATmega645 ATmega649 ATmega2560 ATmega2561 ATmega3250 ATmega3250P ATmega3290 ATmega3290P ATmega6450 ATmega6490 ATmega8515 ATmega8535 ATmega32C1 ATmega32M1 ATmega32U4 ATmega32HVB ATmega43U	AT86RF401 AT89S51 AT89S52 AT90CAN32 AT90CAN64 AT90CAN128 AT90PWM2 AT90PWM2B AT90PWM3 AT90PWM3B AT90USB82 AT90USB162 AT90USB646 AT90USB647 AT90USB1286 AT90USB1287

 

Supported JTAG ICE devices:

AT90CAN128，ATmega128, ATmega128L, ATmega16, ATmega162, ATmega162V, ATmega165, ATmega165V, ATmega169, ATmega169V, ATmega16L, ATmega32, ATmega323, ATmega323L, ATmega32L, ATmega64, ATmega64L

The package includes:

• One 2-in-1 Programmer/ICE with latest firmware OS from AVR Studio 4 with JTAG/ISP cable-on-board
• One USB Cable
• One USB driver/Software CD with user guide