Potting materials
| Model: | HL-1025 |
|---|---|
| Brand: | CASTER |
| Origin: | Made In China |
| Category: | Chemicals / Resin |
| Label: | silicone , thermal |
| Price: |
HK $80
/ pc
|
| Min. Order: | 1 pc |
Product Description
First, the HL-1025, instructions for use
The HL-1025 is a low viscosity, flame retardant two-component molding silicone thermal conductivity encapsulants can be cured at room temperature to be cured with heat. The product is widely used in potting and sealing of the HID, the power module, transformer, relays, circuit boards and other electronic components, flame retardancy can reach the level of UL94-V0. Full compliance with the EU ROHS directive.
Second, the curing of former technical parameters A component B component
Color, showing dark gray white
Viscosity (25 ° C cps) 4200 4200
Density g/cm3 1.52 1.52
Mixed viscosity of 4200
Shelf (25 ° C) for 12 months
After curing performance parameters:
Physical properties
Determination of hardness (Shore hardness A) 50-60
Coefficient of thermal expansion (℃) 2.3X10-5
Thermal conductivity (W / MK) 0.8-1.0
Effective temperature range ℃ -60-260
Fourth, the conditions of use
Mixing ratio A: B = 1:1 (weight ratio)
Gel time of 25 ℃ × 6-8 hours
Time 25 ° C × 1 hour (mixed amount of 100g)
Curing condition of 25 ℃ -24 hours, 80 ℃ -2 hours, 100 ° C -30 minutes
Fifth, the electrical properties
Volume resistivity Ohm.cm 1.0 × 1016
Surface resistance Ohm 1.2 × 1015
Resistance voltage KV/mm2 25
Insulation constant 1KHZ 4.2
Dissipation coefficient 1KHZ 0.02
Sixth, the use of
1, mixed, first of all the A and B components in the respective containers full Stir.
2, A and B, in accordance with the weight ratio of 1:1 mixed.
3, vacuum deaeration.
, Poured into the component or model.
Products for potting phosphide, sulfide, or hydrazine may cause the HL-1025 to produce incomplete curing or curing phenomenon, so the application of the best conducting simple experiments, if necessary, needs cleaning applications site.
VII Precautions
1, the compound should be sealed. A good mix rubber should be run out of time to avoid wastage.
This product is a non-dangerous goods can be stored in accordance with the non-dangerous goods.
3, after storage for some time, plastic may be layered. Stir before using.
, Packaging and storage instructions
This product is 20Kg / sets. (A component of 10Kg, B component 10Kg), a cool, dry storage, the storage period of one year.
The HL-1025 is a low viscosity, flame retardant two-component molding silicone thermal conductivity encapsulants can be cured at room temperature to be cured with heat. The product is widely used in potting and sealing of the HID, the power module, transformer, relays, circuit boards and other electronic components, flame retardancy can reach the level of UL94-V0. Full compliance with the EU ROHS directive.
Second, the curing of former technical parameters A component B component
Color, showing dark gray white
Viscosity (25 ° C cps) 4200 4200
Density g/cm3 1.52 1.52
Mixed viscosity of 4200
Shelf (25 ° C) for 12 months
After curing performance parameters:
Physical properties
Determination of hardness (Shore hardness A) 50-60
Coefficient of thermal expansion (℃) 2.3X10-5
Thermal conductivity (W / MK) 0.8-1.0
Effective temperature range ℃ -60-260
Fourth, the conditions of use
Mixing ratio A: B = 1:1 (weight ratio)
Gel time of 25 ℃ × 6-8 hours
Time 25 ° C × 1 hour (mixed amount of 100g)
Curing condition of 25 ℃ -24 hours, 80 ℃ -2 hours, 100 ° C -30 minutes
Fifth, the electrical properties
Volume resistivity Ohm.cm 1.0 × 1016
Surface resistance Ohm 1.2 × 1015
Resistance voltage KV/mm2 25
Insulation constant 1KHZ 4.2
Dissipation coefficient 1KHZ 0.02
Sixth, the use of
1, mixed, first of all the A and B components in the respective containers full Stir.
2, A and B, in accordance with the weight ratio of 1:1 mixed.
3, vacuum deaeration.
, Poured into the component or model.
Products for potting phosphide, sulfide, or hydrazine may cause the HL-1025 to produce incomplete curing or curing phenomenon, so the application of the best conducting simple experiments, if necessary, needs cleaning applications site.
VII Precautions
1, the compound should be sealed. A good mix rubber should be run out of time to avoid wastage.
This product is a non-dangerous goods can be stored in accordance with the non-dangerous goods.
3, after storage for some time, plastic may be layered. Stir before using.
, Packaging and storage instructions
This product is 20Kg / sets. (A component of 10Kg, B component 10Kg), a cool, dry storage, the storage period of one year.
| Payment Terms: | T/T in advance |
|---|---|
Member Information
| Warsen Tontru | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Trading Company |
| Phone: | 15018541865 |
| Contact: | Jenny (sales manager) |
| Last Online: | 22 Feb, 2012 |