Model: | - |
---|---|
Brand: | - |
Origin: | Made In China |
Category: | Electronics & Electricity / Breaker & Protector |
Label: | drop-out fuse , fuse cutout , high-voltage |
Price: |
-
|
Min. Order: | - |
Outdoor dropout fuse is the most common device used in power distribution systems. However, there are many low cost products in the market which do not perform well and have short life. Those products can cause great failures to the power network.
After series steps of engineering development, FCRW(M) outdoor dropout fuse’s performance and features has become competitive with the best dropout fuse products in the world. Goodrun fuses have robust structure and precision assembly. It can break off as large as 16KA load current. It also meets common national and international standards, including GB15166.3-2008, IEC2822, DL/T40 97, ANSI/IEEE37.41. It is also certified by China National High Voltage Electric Equipment Inspection Center. It is a patented product. Patent No. 200720019400.2
Technical characteristics
Optimized Integrate Structure
The excellent current drop off capability and reliable operability of the Goodrun Dropout fuse comes from its optimized integrate structure design. With years of development,Goodrun developed and engineering optimized integrate structure for FCRW series. All parts used in producing FCRW fuse are well designed and manufactured
Extreme Large Current Break Off Capability
With the increase of power grid capacity, the demand of large current break off capability has increased. (false current has not relation to the transform capacity.) Break off capability is one of critical spec for all dropout fuse. FCRW fuse can reach up to Capability 12.5KA/12.5KA/12KV false current and 16KA/12KV break off capability.
High Strength Porcelain & Coating
FCRW(M) fuse is constructed with high strength porcelain tube coated with Porrok expansion cement which has the same thermal expansion ratio as the porcelain. It prevents thermal stress impact and break due to the sudden temperature change
Excellent Conductivity
Both upper and lower conduct plates are design as a integrate piece with minimum 5 micron silver plating. With the optimized design of contact point, its resistance value is below 100 micro ohm.
Single-ended down exhaust
To prevent water entering when it rains and short circuit of upper line which caused by free gas from the arc
UV Resistant Fuse Tube
The fuse tube is coated with UV resistant material to extend its life
Patent
The unique design of lower contact point with U type spring reduces the thermal transfer surface between conducting strips, and reduce heat between contact which may cause high resistance and contact point burning. Patent No. 20070019400.2
Humanization design concept
Pull ring is painted with reflection strip for easy operation in dark condition. The upper contact lock guide help to close the contact precisely.
Shanghai GoodRun Electric Power Technology CO.,LTD | |
---|---|
Country/Region: | Shang Hai - China |
Business Nature: | Manufacturer |
Phone: | 13816514536 |
Contact: | NAN Yang (Sales) |
Last Online: | 15 Jul, 2011 |