CPVCperformance of aggregates

Chemical tower filling is used for the production of tower fillings including pall ring, plum blossom ring, square pigskin ring and ladder ring etc. It is widely used for the chlorine-drying tower and off gas absorber of chlorine-caustic industry and has the advantages of high compression strength and long service life. The common hot water fittings material is used for the production of anticorrosion valve, fittings, pump body and civil non-drinking hot water fittings etc of the chemical industry. Because it has good heat and corrosion resistances, it can be used for transferring the mediums including chlorine, liquid chlorine, hot acid, hot caustic, hot salt and hot water under 95 ℃.

The material of drinking hot water fittings is healthful with innocuity and used for the drinking water fittings and valve and fittings of hot drink, food and milk running piping. Cable duct material is used for the production of high-voltage power cable sleeve underground. This kind of pipe has the advantages of light weight, easy construction, un-rust, non-burning, good resistance to elements, good electrical isolation and magnetic insulation, high tensile strength, break strength, compression resistance and impact resistance.

Chemical pipe material can be used for production of hot sewage water pipe, electroplating solution pipe, and hot chemical agent pipe of chemical plants and wet chlorine running piping of chlorine-caustic plants. The piping produced by this granular material can be used for hot water and corrosion medium transfer and can keep the enough strength if the medium temperature is not more than 100 ℃. CPVC is one of the several polymers that can be used at the high temperature circumstance and the higher inteinsic pressure. This kind of pipe material has small mass density and low heat-transfer coefficient, and doesn't need temperature preservation. Item, Unit, Drinking hot water fittings material, Common hot water fittings material, Chemical tower filling, Cable duct material, Chemical heat resistant material, Density Vicat softening temperature .

Packing and specification： 

This product adopts polyethylene bags for internal use and polypropylene bags for external use with net weight of 25 ± 0.2kg per bag.

Storage and transportation: 

      This product should be stored in dry and ventilated warehouse, stacking height should not be more than 10 bags to prevent sunlight and moisture. Transport must have shelter and be clean to prevent sun, rain and heat. This product is non-dangerous goods.