Water soluble fluorescent red ink printing

Model:	-
Brand:	Alisen
Origin:	Made In China
Category:	Chemicals / Coatings, Varnish & Painting
Label:	Water-based fluoresc , Fluorescent Ink Scre , Water-based fluoresc
Price:	¥160 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Water-based water system for a variety of fluorescent oil.

Fluorescent water-based metal paint red, for the hardware series, fluorescent red, fluorescent yellow, fluorescent blue, fluorescent orange, fluorescent pink and so on.

Use: Suitable for high-end coating of glass surface.

Features:
◆ formulated using high quality raw materials.

◆ adhesion, weather resistance, toughness, and the construction of tolerance is good, since the dry at room temperature without baking.

Use

1) Mix the paint when used only with paint.

2) before spraying the glass surface should be dust, oil, in addition to clean water, to ensure that no surface water being sprayed, dust, oil and other impurities;

3) cover with paint after time, to prevent hardening crust.

4) The selection of supporting the day that water, with dilute paint should not be excessive when, to avoid increasing the construction times.

5) The construction of the environment to maintain dry, clean and cool environment should be appropriate, not at a high temperature, high humidity environment or polluting operations. Proposed construction can be added when the humidity 5-15% of the anti-white water, reduce or eliminate the phenomenon of white

6) to be dry during use and to maintain a good environment (dust, ventilation)

Ratio: Paint: Solid: thin = 1:1:0.8 ~ 1 (summer ratio)

Paint: Solid: thin = 1:0.8:0.8 ~ 1 (winter ratio)

According to climate and environmental conditions by adding appropriate amount of diluent to mix, 200 mesh -300 mesh cloth filter, spray, brush or wipe coating can be.

Gun caliber: 1.5 - 1.8 mm Air pressure: 3 - 4 kg / cm 2

Use of a coating: 120 - 150 g / m 2
Drying time: dry ≤ 15
Hard work: <24 hours (room temperature 25 ℃ / Humidity 70%)