Structure
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
Direct expansion coils with condensate drain tray.
Hermetic compressors
High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise.
Centrifugal fan
Forward curve centrifugal fans for air treatment section and axial fans for condensation section.
Front, side and underside air discharge of the treatment  unit.
High external pressure, long air supply distance.
Electric panel
Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components.

Easy operation line controller:
Cooling/Heating//Auto
Error indication
Timing On/Off
Optional
Economizer with fresh, return air dampers with cowl for models from 14 to 75
Free cooling function for low ambient temperature.
Hot gas bypass (where low-local situation occurs and where it is necessary avoid low suction pressure and “compressor cycling”).
Low ambient control device for operation of outdoor units at
ambient temperatures from less than 20°C down to -10°C.
BMS
T3
Accessories
Air pressure switch for indoor fan.
High Static condenser fan option with sealed + drain condensing section.
Optional water heating coil
Metal or plastic mesh on condenser coil.
Optional supply / return air configurations
Upgraded evaporator fan motor drives.
G4 filter
NOMENCLATURE
L AA H C P 10
① ② ③ ④ ⑤ ⑥
① L: Lark air product
② Unit type
AA: Air to Air
AW: Air to Water
WA: Water to Air
WW: Water to Water
③ C: Cooling only
H: Heat pump
④ Refrigerant type
--: R22