Embossing machine

Suitable for coil which thickness is 0.3-0.7mm, the width of the coil is 1200mm.

1.      Roller: Ø380×1400mm 2 sets

2.       Material: 42Cr2Mo steel forge material, intermediate frequency and quench, HRC50

3.       Main motor: 7.5KW frequency conversion timing, FULIN transducer, GUOTAI cycloid gear down machine.

4.       Bearing: 3003134

5.       Embossing Machine Production speed:1-15m/min

6.       Pressure type: screw

Uncoiler

1.      Using the magnetic arrester to adjust the tension, 400N/M, handwheel silk pole adjust the position.

2.      Ø500 core, support two sides.

Recoiler

1.      Photoelectricity system, the level off range is within 1mm in the recoiler.

2.      Ø500 core, support two sides.

3.      7.5KW frequency conversion motor, cycloid decelerate machine, the recoiler driving is transducer moment mode.

4.      All the machine process and procession should be according to international standard GB1800-79.