GL 368A Key machine:

Left rocker bearing is driven by twist-roller; right rocker bearing is operated by hand 
*Equipped with slitting saw blade (straight chisel) and angle cutting knife (skew chisel) made of tungsten steel.
*Alignment scale is clear; easy to align.
*Butterfly screw is installed with bearing, which can be highly tightened up and easy to operate.
*High precision; time saving; efficiency improved. 

Left rocker bearing:
*Widened space between 4-sided clamps can clamp keys at a maximum of 120 mm and various groove double-sided keys as required.
*New-type clamp is perpendicular to guide sleeve, which will improve duplication precision.
*Use stop plate in clamp groove to verify the duplicated position of keys without scraps.
*Newly developed 4-sided clamps can guarantee precision of duplicated keys.
*Adjustable cutter safety screw on the sight bed can prevent mutual damage between cutter and clamp.

Right rocker bearing:
*Upper and lower layers of clamps, which can duplicate keys 110mm in length & special keys with no need of any accessories, such as square keys(SOLO), big & small keys, semicircle keys (ABLOY), leftward & rightward opening keys, knob lock and iron cabinet lock.
*Specially designed 900 balance screw, when tightened up, it can fix clamp for vertical cutting; when loosened, it can be used for arc cutting of semicircle and square keys.   

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different cutters.

DIMENSIONS

Width: 450mm

Depth: 320mm

Height: 220mm

Net Weight: 25kg

Gross Weight: 27kg

Measurement: 3.2 Cubic Feet

MOTOR

Single-phase

HP 1/4

Rpm 1720

110V or 220V

50Hz or 60Hz