Tortoise Shell Mesh:
Product Description: The product is a newly developed large mud tortoise shell mesh, lining material of high temperature resistant is generally reinforced with tortoise shell mesh, carbon steel (A3F) tortoise shell mesh, special circumstances with 0Cr13 material. Before using, firstly we should weld the tortoise shell mesh on the boiler or hot air wall, and then smear refractory material.
Product advantages: large hexagonal mud turtle claw tortoise shell mesh obviously enhanced the anchorage capacity of the material with lining. Thereby effectively enhancing the capability of links to their own performance, can easily control the heat-resistant insulating layer from the skin and shed, and raise the fastness of a combination of lining materials.
Product Material: casting amorphous lining materials, anchoring lining materials
Widely optional material: A Carbon Steel 0Cr13.1Cr13. 0Cr18Ni9.1Cr18Ni9Ti, pitch 2cm-6cm, net thickness 1cm-2.5cm, thickness 1mm-3mm
Mesh size is determined by the purchaser. Our factory processes all kinds of custom-made. We have manufactured a variety of metal parts for many factories; have provided a variety of lining of metal structural parts for a number of petrochemical equipment manufacturing enterprises. Our production are widely used in large-scale equipment in petroleum chemical industry, in particular, is conducive to the catalyst-based device structures lining the major equipment, which can improve the resistance and strength of lining wear, lining wear-resistant is usually reinforced with the turtle nets, general site with carbon steel (A3F) shells networks, such as the reactor and a secondary cyclone, U-tube regenerator flue gas, etc.; high temperature parts alloy (1Cr13) shells networks, such as the regenerator, and one or two cyclone, etc.. Tortoise shell mesh is a hexagonal grid which comes from 20 * 17.5 mm steel flat, fix on terminal board of the insulation nails