Series of High-voltage Tester of AC & DC (Non-partial Discharge) for Light Oil-immersed Transformer
   

Technical parameter:
HRYDJ（W）series are made of high-quality materials, which contribute to its low losses, small volume, little weight, compact construction and convenience. It is widely used in power & electric system, research institutes, and large mining factories to do the tests of AC & DC withstand capability and insulating materials’ characteristic for any kinds of high-low voltage power equipments, power cables, generator, etc. Testing transformer is divided into tow kinds of voltage: single-stage and cascade. Special order is also available.
Rated capacity: 1.5-1500kVA Output voltage: 1-1500kV

         

Output voltage	50kV	100kV	150kV	200kV	250kV	300kV	500kV	1000kV	1500kV
Output voltage	200V	200V	400V	600V	600V	600V	3.3kV	3.3kV	3.3kV
Partial discharge of Rated capacity	≤10pC	≤10pC	≤10pC	≤10pC	≤10pC	≤10pC	≤10pC	≤10pC	≤10pC
Impedance voltage	＜8%	＜8%	＜8%	＜10%	＜10%	＜10%	＜10%	＜10%	＜10%
no-load current	≤4%	≤4%	≤4%	≤5%	≤5%	≤5%	≤5%	≤5%	≤5%
waveform distortion	＜3%	＜3%	＜3%	＜3%	＜3%	＜3%	＜3%	＜3%	＜3%

          ☆Introduction of HRKZX（Q）/T（Q） Automatic High-voltage Tester for Control Console
    Control Console (Cabinet)
As the corollary equipment of testing transformer, it obtains lots of characteristics, such as great performance, small volume, little weight, reliability, over-current self-protection and non-zero switching-in prevention.
Rated Capacity: 1.5-6 kVA (cabinet), 6-1500kVA（console）
Voltage:
Input voltage of control cabinet: AC220V Output voltage of control cabinet: 0-250V
Input voltage of control console: AC380V Output voltage of control console: 0-430V (0-650V)