Street lamps of the structure, technical parameters of each component performance explains:

 

One, the lamp pole:

 

1, both Shanghai baosteel produces high grade material selection of low carbon steel, steel Q235A type silicon content by no more than 0.04%, large bending machine a bending forming, straightness error 0.05% max., the ability to resist wind light pole 36.9 m/s 11 class above design, resist seismic intensity for eight level.

 

2, stem TiZong high x meters, XMM, for under the diameter and wall thickness for XMM caliber XMM. With flanges flanges, light pole bottom from mounting holes for & # 216; X, through the anchor bolt installed in basis. (x for users set parameters, or by the company by the conventional configuration)

 

3, the lamp pole soldered for automatic submerged arc welding connect, welding and reliable, smooth surface, no apparent porosity, welding tumor, bite edge welding defects, ultrasonic inspection inspection, Ⅱ level standard of welding GBl1345 requirements.

 

4, steel rod anticorrosive processing with internal and external galvanized, galvanized process after pickling, galvanized, washed, phosphating, passivating galvanized layer process, such as surface is smooth and beautiful, burnish is consistent, without wrinkled skin, flow fall and zinc tumor, peeling, spots, Yin and Yang noodles, defects, zinc layer thickness, accord with 86um above to GB/T13912-92, galvanized layer with the GB2694-88 adhesion, anticorrosion longevity requirements with more than 30 years.

 

5, after the electrostatic pensu light pole galvanizing can select colors (before), plastic spraying grind arenaceous to increase adhesion, plastic spraying process in strict control curing time and temperature, ensuring uniform, smooth, plastic layer without porosity. Pensu layer thickness p GB9286-1Ooum, adhesion to 8.8 magnitude, smooth surface, hardness 2H p.

 

 

 

Second, lamps and lanterns:

 

1, the light body, light cover using aluminum alloy die-casting, surface via electrostatic pensu processing, light structure corrosion. Lamps shell Ⅱ level; anticorrosion performance Protection class IP65; The Ⅰ class level electrocuted. Meet the safety requirements and testing of lamps and lanterns GB7000.1-7000.6) (rules.

 

2, reflector adopts high purity aluminium pressure molding, the anodic oxidation electrochemical polishing treatment, has an optical stable performance, reflectivity high characteristic.

 

3, pervious to light cover using surface high strength of toughened glass, high temperature resistant 200 ℃ above, euphotic rate high, impact resistance.

 

4, reflector, toughened glass and lamp holder into one, with seal adhesive composed for bubble structure within, with good sealing performance, sealing ring high temperature resistant 250 ℃ above, sealing of IP66.

 

 

 

Three, light:

 

Using the American CREE, purui, Taiwan crystal yuan and light macro service such as high power LED lamp bead or module, match Taiwan inscription weft. High quality power (or users to choose other brand)

 

 

 

Four, other technical parameters:

 

1, the lamp pole height: + 5%

 

2, beam boom high (long) : + 1%

 

3, rated voltage: 220V (effective mass)

 

4, rated voltage: 500V (effective insulation quality)

 

5, rated frequency: 5OHz

 

6, insulation resistance: 5OOMQ p

 

7, dielectric strength: can withstand the exchange 5Ohz, 15OV (effective mass), experimental voltage lasted lmin no breakdown or flash winding phenomenon

 

8, power factor: CNS for p 0.85

 

9, lamps and lanterns anti shock protection category: Ⅰ classes

 

10, wiring way: single-phase

 

11, lamps and lanterns efficiency: p 75%

 

12, protective level: IP65

 

13, reflective materials: 3002-0 high purity aluminum

 

14, chimney materials: high transparent surface toughened glass strong resistance

 

15, lamps light distribution curve: the airfoil light distribution curve

 

16, lamps and lanterns all appliances (LED lamp beads, modules, and aluminum plate, radiators and constant-current source) are installed in the lamps and lanterns

 

 

 

Five, inspection standards:

 

The lamp pole inspection standards: quality control manual, inspection, testing standard and the corresponding gb and technology documents.

 

Lamps and lanterns inspection standards: GB3037-91 and corresponding gb and technology documents.

 

 

 

Six, packing:

 

Street lamps, packed and lamps and lanterns light pole weaving packing packaging.

 

 

 

 

 

 

Special note:

 

1, the basement factory requirements need to press manufacture; Open door need special spanner; electric Installation must ensure that the light body safely grounded.

 

2, my company can provide according to user any pictures and parameters, the processing of road lights.