Five million-pixel color camera is used to provide high resolution and high speed application, capable of 0201 component inspection, and 01005 in the future.

◇ The system captures images in the on-the-fly mode: color camera is set with suitable time of exposure according to stage moving speed so that the stage can keep moving during image capturing..
◇ Telecentric lenses are used. The shape and size of component will not be influenced by board warping. The image is clear and stable, without deformation.

Image captured on-the-fly	Clear image

　Features　

JET-7000E is distinct from other products of the same categorization due to its numerous outstanding features:
◇ Importing coordinates from the CAD file to facilitate AOI programming.
◇ Built-in component library, and off-line programming system
◇ Can be used both at pre-reflow and post-reflow station, and also can be used to inspect red-glue process.
◇ Locate multiple fiducial marks for clustered board panel, including Bad Mark function.
The barcode reading function of the camera spares the cost of buying additional barcode reader.

　High Coverage　

1. Color light sources can project lights from various angles.
2. Image feature extraction technique is developed to accurately analyze the soldering quality.
3. Special logic algorithm attains better results in lowering the false reject rate and increasing the first pass yield.

　Precisely positioning linear motor　

Frictionless magnetic feature of linear motor, which is more reliable and durable, makes positioning more precisely. Its scan range is 520 x 520 mm, capable of most of large size PCB test, such as motherboard and server board.

　Fast and easy programming　

1. Importing coordinates from the CAD file to facilitate AOI programming.
2. Program files for components of certain package can be loaded in directly from library
3. Built-in Library for various components makes user training easy
4. Off-line programming is available. The program can be deb ed without having to stop the machine.

Importing coordinates from the CAD file for AOI programming	Various component libraries

　Statistic processing control system (SPC)　

1. SPC provides component image guide and failure analysis report, figuring out the defective parts quickly and sending information to the rework center to lower ICT test cost.
2. The user-friendly image interface for the repair station can effectively assist test personnel to recheck the defective parts. SPC calculation and report generation are also available.
3. All test figures and defective part pictures are recorded automatically. The operator can scan barcode to check and extract the complete report of manufacturing process.

　JET-7000E Specification　

　Dimension　

-Front view-	-Side view-	-Top view-