*More machine heads can process at the same time, can also be used alone, two times increasing in efficiency

*German double-nut ball screws, imported guide rail .the adoption of the breakpoint memory, guarantee on the accident (power off) or the next day can process

*Gantry movement, long times use no distortion, the move precise positioning accuracy

*Large cutting power not only to elaborately carve a jagged, smooth clear bottom

*Increase the efficiency when doing the complicated graph, good coherence and high quality when batch processing, good stability with the long time working and low error ratio

Wood, Plastic, Aluminum, Di-Bond, Engraving Board, Fomex.Engineering plastics, marble, acrylic, Perspex, PVC, Composite panel, Copper, Alloys, MDF, etc.

 

Model                      FLD-13  S                Option

X working area               1300mm               <2000mm

Y working area                                     <4000mm

Z working area                                     <1000mm

Max feeding                   >25m/min

Work-holding                /by clamp

Processor                   DSP/100MHZ

Interface                    USB

Command                   G*.uoo*.mmg*.plt

Surroundings for software      DSP

Power                      AC220v/50HZ               AC380v/50HZ

Main axle power rate          2.2/3/4.5/6kw

Main axle rotating speed       0-24000rpm/min

Work Mode                 stepper                    Servo