The Automatic PVC Banner Welding Machine is specially used to weld large format outdoor spray painting cloth, photo cloth, posters, light box cloth , tarpaulin , tent , pvc/pu/pe and other plastic materials that can be hot melt . Simple operation and high efficiency.

 

Advantages:

 

  ● With sensor in the welder nozzle, can control the work temperature accurately.

  ● Use hot air to weld materials, low cost.

  ● Automatic work , work speed , temperature and fan motor speed are adjustable.

  ● Body is Steel and wheels is aluminum, very strong.

  ● Light weight, easy to carry and operate.

  ● Application for PVC, PE and other plastic material that can be hot melt.

  ● It can operate continuously for 8 hours.

  ● With CE, RoHS Certificates and one year warranty period, free replacement parts.

 

Specificate:

Model: LC-3000A

Power: 1300W

Voltage: 110V/220V

Seam width: 2-4cm

Seam thickness: 0.1-1mm

Speed: 1-15m/min

Temperature: 0-620 degree

Wheels: Aluminum

Certificate: CE, ROHS

Warranty period: One year

Display screen: LED

Weight: 14kg

Dimension: 49*30*29cm

Package: Carton box with foam

 

Operation steps:

 

◆ Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else. 
◆ The overlap width of the two pieces is about 3 mm, the width of the nozzle of hot seaming machine. 
◆ Put the machine nozzle between two overlap pieces. The press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
◆ Switch on the motor power and then adjust speed.
◆ Turn on the movement switch. Press heating power key to adjust temperature. 
 ◆  Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself. 
 ◆ Turn the bar by clockwise to cease the automatic work. 
 ◆ The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.