Pin precision cutting-off &end face grinding

1. During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions

2. The tightness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt.)

3. The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference

of thickness of cutting –off sander piece.

4. The rapid chuck is used to hold the working quick, and Ø1-25mm is the same.

5. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability

 low wearing rate and long life.

6. The rapid positioning rule is in the unit of 20mm and provided with a micro rule (0mm to 25mm) of which the

zeroing point is the dimensions at the rapid positioning point.

7. The minimum of cutting length is 60mm