Ruizhou Dual-head CNC Leather Cutter  

Ruizhou Dual-head CNC Leather Cutter combines three work areas in one cutter, capable of nesting, cutting & collecting simutaneously. The conveyror belt further optimizes the work flow by the auto-feeding function. With it, you can cut the materials continuously from nesting to collecting. 

The dual cutting heads double the cutting speed. That is a cutter can cut in high speed, high precision without interference and confliction.

 Features:

1. CNC control system: it digitalizes the cutting processes, so frees you from moulds and dies, saving you lots of money. It also enlarges your products lines. You can design more complicated and exquisite patterns. 

2.  Smart nesting in section: for large skin or synthetic materials in rolls, the cutter has a new nesting function of dividing the whole piece of material into sections, allowing you to nest continuously and inter-sectionally. The converyor belt transports the nested section to the cutting area. The cutting system is able to recognizethe sectional area to cut. In this way, it successfully avoids the waste of material which is caused by the limited nesting space of the table surface for large skin material and practically enhances the utilization rate of material by 5%.

 3. Dual cutting heads work in opposite direction: It applies a multi-task operation system which makes the each cutting heads run in its own path without any confliction. It allows two separated tool heads cutting on difference with nesting and cutting process, thus enables the machine running on-stop. 

4. Non-interference collecting:  the rolling table surface makes collecting easy and quick, without causing any interfrence with nesting and cutting process, thus enables the machine running non-stop.   

5. High productivity: With two cutting tools working at the same time, the productivity is increased by over one fold compared with normal flatbed leather cutter. It is able to reach a daily production of between 800-1000 pairs of shoes and completely meets the demand of massive production.

 6. Fast cutting: It adopts a hanging-arm abd sliding-rail design, which minimizes the rub and resistance force against the tool heads and enables the tool heads running smoothly and quickly and the running speed of each tool head is increased by 100% in conrast to normal flatbed leather cutter. 

7. Practical solution: It combines nesting, cutting and collecting functions, no need to use an extra nesting machine or feeding roller, which makes operation simpler more convenient and more practical.

 8. Saving time, material and space: Dual high-speed tool heads remarkably increases productivity, and interactive nesting between the operator and the cutter enhances the utilization rate of material. In addition, the compact design of the machine body takes a lot less space.