PTB710 negative pressure transmitter
PTH710 are negative pressure sensor/transmitter
Micro pressure sensor adopts imported GanYa chip, stainless steel seal welded structure, good moistureproof and excellent dielectric compatibility, suitable for medium pressure faint occasion of measurement and control.

Process: -0.1 is 1KPa 0 ~ ~ ~ ~ ~ MPa 10KPa 100KPa ~ ~ ~ 1 (MPa)
Integrated precision: 0.2% FS, 0.5% FS, 1.0% FS
4 ~ 20mA output signal: (two-wire system), 0 ~ 5V, 1-0 ~ 10V (5V, three-wire system),
Power supply voltage: 24DCV (9 ~ 36DCV)
Medium temperature: - 20 ~ 85 ° ~ 150 degrees c
Environmental temperature: normal (20 ~ 85 ° c) -
Zero drift: temperature than ± 0.2%fs 0.05% degrees
Temperature range than ± 0.2%fs 0.05% drift: c
Compensation temperature: 0 ~ 70 ° c
Safety overload: 150% FS
Limit overload: 200% FS
The response time: 5 mS (FS) up to 90%
Load resistance: the current output type: the biggest Ω 800, Voltage output type: more than Ω MIT $50K
Insulation resistance: Ω (100VDC) than 2000M
Sealing level: IP65
Long-term stable performance: 0.1% FS/year
The vibration in mechanical vibration frequency, 20Hz ~ 1000Hz, less than 0.1% output changes 0.2%fs
Electrical interfaces (signal interface) : Hector, connectors, four core shielding wire, four core aviation connectors, tight line nut
Mechanical connection (threaded interface) : 1-2 20UNF, M14 x 1.5, M20 x 1.5, etc, and other M22 x 1.5 can according to customer request design thread