The glass reactor:

• The introduction of the products special properties

1. It adopts AC frequency control of motor speed So the rev is steady , no spark appear, wide moment, safe, and can be used as the constant working.
2. All sets of glass apparatus are made up of GG17 or GG3.3 with the double-layer jacketed structure. The thickness of the glass is 5-7 mm with good chemical and physical properties.
3. The teflon components sealing method makes it in a state of high vacuum ,anti-acid and anti-alkali.
4. It can work under the ordinary pressure and positive pressure and can reach the -0.098Mpa positive pressure.
5. Constant temperature and numerical control oil bath pan, with beautiful and anti-corruption stainless steel inner tube ,is controlled by the micro-computer which makes it work accurately, low fluctuation and conveniently.
   Five-mouth plane flange reactor cap is connected by the PTFE and is demounted easily with the characteristics of good sealing ,anti-acid and anti-alkali.
6. The reactor stirring bar’s inner bellycore is made from the 321 stainless steel specially ,covered by the PTFE tube which has the strong ability to anti-acid and anti-alkali. The bar is manufactured by the application of military industrial technology, so it boasts finer work and is operated with facility.
7. The drain hole contains the flange mouth and the PTFE drain valve which leave no dead angle and rudimental material. The whole set of drain valve can be easily demount and the inside reactor can be cleared conveniently.
8. The real time temperaturanzeige

• The introduction of the production function
  The double –glass reactor realizes “one tractor severs several purposes” in the experiment, satisfying diversify of aspects of different tests. It can be used for the following reactions:

1. Vacuum stirring reaction
2. High-temperature and low-temperature reaction
3. Constant speed running mixing reaction
   Distillation , refluence and condensation reaction.
   Negative pressure operation and separation
4. To do the rectify through assembling the rectifying pillar
   Assembly the production line in accordance of the specific demands.
5. Customize new products based on clients’ different demands.

• Basic parameter:

1. Specification: 1L
2. Mould: SF-1D
3. Stirring power: 40W
4. Stirring speed: 50-800r/min after the starting up
5. Motor moment: 30N.cm
6. Heating power: 2Kw(220V)
7. The dimension of the whole body: 400*500*1300mm
8. Positive pressure: -0.096Mpa
9. N.W.:26kg

• The detailed configure of the reactor:
• The standard configure for the 1L/2L/3L double-glass reactor:

• The detailed configure of the high-temperature recycler for 1L/2L/3L reactor: