Product Description
Product Name: Copper centrifugal supercharger impeller VMP
Features:
Copper centrifugal supercharger impeller VMP, with compact structure, small footprint installation, smooth operation, easy maintenance and so on. The specially designed set of mechanical seals, to prevent transmission fluid leak.
Uses:
Copper centrifugal supercharger impeller VMP for fire protection, industry, agriculture, water towers, pumping deep, freshwater and marine transport.
Note:
1. Pump and motor must be connected to the shaft (Rotor) against 1 ~ 2mm, and then tighten the bolts on the coupling;
2 pumps must be started manually turn the pump rotor, feeling flexible;
3 pumps in the pump start-up is filled with water must be guaranteed (the water pump section of the plug until the water spray), and then close the exit valve and pressure gauge, vacuum gauge plug;
4 Note always check whether the pump coupling the lower bottom water exposed, if there is a large leak, replace the cap should be adjusted or mechanical seal;
5. Repair, water pump for 1000 hours, maintenance should be carried out, impeller and sealing ring gap larger than 0.5mm, the seal should be replaced;
6 down, slowly close the exit valve and pressure gauge, vacuum gauge cocks, and then turn off the motor.
Yangcheng pumps, vertical multistage pump Guangzhou, copper impeller, the real and durable.
Guangzhou water pump, Universiade partners, pool pumps, pool pumps designated manufacturers Universiade
Lead Time: | 1-15 days |
Head: | 59.5 |
Flow: | 7 m3/h |
Power: | 3 Kw |
| |