The PathmakerTM Coronary Balloon Catheter is introduced into an artery or vein to dilate a part or parts of the vascular systerm. It is designed to allow easy exchange of the catheter using a standard length guide wire.  The proximal shaft is a PTFE coated stainless steel tube.  The steel construction allows superior proximal pushability with a smooth transition to a distal shaft specifically designed to be trackable through tortuous vasculature. The distal section is applied with hydrophilic coating. The semi-compliant balloon material allows high-pressure dilatation while maintaining control of balloon size.  Two radiopaque platinum marker bands are located within the balloon with the exception of 10mm length balloon, where the marker band is centrally located.  The internal lumen of the catheter accepts a standard 0.014 inch PTCA guide wire. The guidewire enters the catheter’s proximal port and advances coaxially out the catheter’s tip, thereby allowing both coaxial guidance and rapid exchange of catheters with a single standard length guide wire.  Two marked sections are located on the hypotube shaft to indicate catheter position relative to the tip of either a brachial or femoral guiding catheter.  The design of this balloon catheter does not incorporate a lumen for distal dye injections and distal pressure measurements.

We Can Also Produce Any Length Balloons Within 40mm Per Customer's Requirements And Offer OEM Customized Products