Function characters
Full automatic tripod turnstile:
1. The whole system operate steady, and the noise is low
2. The turnstile will get down the pole when the power is off, take up the pole when the power is on automatically
3. The system has the function of testing the equipment and cables, easy to maintain
4. The system has time protection function.
5. The system has indication of going through function.
6. The system has automatic protection and automatic reset position functions.
7. The system has standard external interfaces, can connect with all kinds of read/write systems.

Semi-automatic tripod turnstile
1. The whole system operate steady, and the noise is low.
2. The turnstile will get down the pole when the power is off.
3. The system has the function of testing the equipment and cables, easy to maintain
4. The system has indication of going through function.
The system has standard external interfaces, can connect with all kinds of read/write systems.
Structure: The material of whole product apply the 304 stainless steel pressing and molding, antirust, firm and durable, and easy to operate and maintain
Size: 1200*280*990mm ( LWH )
Material: 304 stainless steel/spray plastics
Width of passage: <600mm
Way of control: Semi-automatic/ full automatic / manual
Way of access: single/double way
Way of read/write: IC card/ ID card/ Magnetic card/ barcode card etc
Working environment: inside, outside ( rain shed is better )

Technical Parameters:
1. Structure: frame construction/ stainless steel case (thickness: 1.5mm)
2. Production technology: computer digital controlled laser cutting
3. Weight: 70kg
4. Length of pole: 510mm
5. Maximum force of the pole: 80kg
6. Driving force of the pole: 3kg
7. Opening time: 0.2 seconds
8. Passage speed: 30 person/ minute
9. Communication: RS485 (distance ≤ 1200m)
10. Power: 50W
11. Power supply voltage: AC220V,AC110V±10% V,50HZ
12. Driving electric motor: brush-typed DC motor (24V)
13. Operating life: three million times
14. LED indicator: 1 unit
15. Card reader windows: 2 units
16. Auto resetting time after break down: 10 seconds
17. Input interface: dry contact signal or +12V level signal or DV 12V pulse signal of pulse width ≥100ms; drive current ≥10mA
18. Working environment: indoor or out door (under overcast shelf)
19. Working temperature: -10℃--75℃
20. Input interface: switch signal ( COM port is ground line )
Relative humidity: <95%, without dew