• Screw Diameter 20 to 90 mm
• Throughput 5 to 800 Kg/hr

Our range of extruder is widely applicable in following industries:

1. Plastic Industries

Twin Screw Extruder is widely used for compounding following polymeric material:

Engineering Polymers:-
Nylon 6 & 66
PBT, ABS, PC, Acrylic, Glass Fiber, PET, Calcium, EVA, TPR.

Master Batches:-
LD - PP base + Pigments
Fillers (Caco2/Caco3) wax
Carbon Black & Titanium Base
Bio-Digradable Master Batches

Filler:-
LD & PP Base (Loading upto 80%)
filler (Caco2/Caco3) wax & additives.

Toners:-
Mono/ Dual

Food & Pharma:-
Tablets & Creales


Salient Features:

• High Torque-High Rpm Gearboxes Torque  up to 3500Nm
• Torque limiter coupling for overload safety  up to 350Kg/Meter
• Bi-metallic & segmented Liner Barrels
• Segmented  Screw elements
• Custom built screw geometry as required
• Screw Designs to meet different compounding requirements
• Screw geometries for Engineering polymers, Fillers, Carbon Black & Colors
• High torque Involutes spline shafts
• Jacketed barrels for liquid cooling to control friction heat within range
• Side feeders for feeding glass & Mineral  to optimized extruder
• Twin screw volumetric feeders for metering feeding
• Devol Vacuum 700Mmof Hg
• Auto Hydraulic screen changer to catch foreign particles & dust.
• Cast Heaters for uniform and fast Heating
• A.C. Inverters to Maintain Voltage/ Frequency & Max torque
• Melt Pressure & melt temperature transducers
• Control cabinet PLC (Programmed logic control) & HMI (Human machine interface)
• Touch screen HMI & PID operated solenoid valves
• Gear box oil cooling unit to control temperature of inlet oil
• Barrel DM Water condenser unit to re- circulate DM Water
• Heavy structure of base frame, Stress relieved after Welding to save from any distortion
• Laser alignment of Barrels and gearbox in reference to Motor
• Low energy cost by operating extruder at max Rpm & max torque
• Low Maintenance cost