Feature:
 GFP-35/GFP-60 is designed to spraying both oil fog and water fog products easier and more efficiently than other applicators. Its fogging tube is constructed of stainless steel, and the formulation and fuel tanks are made from r ed chemical resistant polyethylene for years of trouble free operation.

1. It can spray both oil fog and water fog.
2. Adopting chemical resistant polyethylene to producing solution tank, so it is economical.
3. Most light in weight, can be start up immediately, it is easy to operating.
4. High-work-efficiency, producing a high output of dense fog.
5. GFP-60, a model like GFP-35, but its spraying volume is bigger than GFP-35, it is more suitable to spraying water fog, and also it is easy of operation, so it is more easy acceptable by our customers. 
   
   Fields of Application:
   We designed this machine mainly used for prevention and control disease and insect pests in agriculture. It is capable of dispensing disinfectants, deodorizers, germicides and insecticides. Generally speaking, it has been used in following fields:
   Greenhouses, campgrounds, cattle-barns, swine/poultry houses, grain mills, cotton, wheat, rice, corn fields, and much more. 
    

Thermal Fog Generator 

Model: GFP-35    It is designed to spraying both oil fog and water fog 
1 Performance of combustion chamber: 13.8-18.2kw/18.8-24.8hp
2 Fuel consumption approximately: 1.5-2.0 litres/hours
3 Fuel tank capacity: 1.5 litres 
4 Solution tank capacity: 5 litres
5 Pressure in the solution tank pproximately:0.25bar or 25pa        
6 Pressure in the fuel tank approximately:0.06bar or 6.000pa           
7 Power supply: 2x1.5 battery    
8 The medicine fluid output approximately:8--42 litres/hours                   
9 Packing weight: 10.5 kgs
10 The size: 1400x310x360 mm