Installed in a relatively small angle on the conveyor belt, weighing all-suspension bridge, the kind of type of bridge, without pivot and movable parts. Long-term stability of such belt scale
And other electronic belt weighing accuracy are unparalleled, the main products of high technological requirements for the county or the need for trade settlement in the industry scene.
Note: ICS-14A four said ICS-14B trust roller trust said three rollers. 

Consists of five parts: lever weighing frame, S-type tension sensor, speed sensor, BST series instrument. Dynamic measurement of the scale error is less than ± 0.5%, widely used for different
The process of weighing in on-site, monitoring production, control and monitoring of inventories in product loading, modern management for enterprises to provide important information.
ICS-17-type weighing bridge is equipped with four sets of parallel bars, said the trust on the roll, with two pull-type load cell balance scale body, both sides of the trunnion bearing friction-free fulcrum, which closed
Device can shock, moisture, corrosion and prevent accumulation of materials, and thus in a hostile environment will not occur in the problems caused by edge devices. Bridge of the main girder weighing rectangular steel
, Which makes the whole weight of the steel bridge with a higher, less weight, the appearance of an area of ​​low fouling, to the normal use, maintenance bring a lot of convenience.
The scale aircraft to adapt to the belt width :500-2400mm Note: ICS-17A four groups said the trust roller, ICS-17B two groups said the trust roller.

Used extensively for general factory conveyor belt weighing, and for the crusher, ball mill, the process of screening or other precise feed control can also be used to monitor the production, control and monitoring product inventories in loading, for enterprise management provide important information, the dynamic measurement error is less than ± 1%
ICS-20-type weighing bridge can be divided into A, B in two forms:
1.20A type II pivot: a roller, a tension load cell, for bandwidth of 500-1800mm
2.20B type II pivot: two rollers, a tension load cell, for bandwidth of 500-1200mm
The scale frame has a simple structure, easy installation, etc., widely used in the factory. Weighing lever one end of the trunnion by the friction-free support, pull the other Duanyou a balance scale load cell body, the overall structure conducive to moisture, shock, anti-material accumulation.