Anti-static PE bag is made through the blow molding  of LDPE,LLDPE,anti-static additibve,color pigment,stability ingredident and is then heat sealed and cut into bag form.Tt has all common characteristice of PE bag as well as anti-static funtion.Its material is soft,and its thickness can be adjusted  freely.It is widely  used in general electronic products like printed circuit board. As an outer package,it can not only lower cost but also protect  electronic products from damaging by static generated by mutual friction of the insulators. This anti-static bag is  the best packaging material for PCB,which makes the static electricity generated on the PCB  to be released to avoid damage.Its technical indexes are  as follows：In accordance with MIL-B-81705B：the inner and outer surface  resistance is 10^8Ω--≤10¹¹Ω .    
    The release time of static electricity is less than 2 seconds.According to the requirements of customers,it can be made into sheet material,coiled material,flat open bag,and  envelope bag.The color also be customized.