Description:

• Network cable tester is a powerful special tool to prevent and solve cable installation problem
• Network cable tester is the best choice to verify any speech and data cable installation procedure
• The tester is capable to have a number of tests such as cable connection sequence, length, user jumper, and cable connection continuity and determine any open-circuit, short-circuit, jumper or cross talk interference
• It is a useful tool to reduce cable installation cost and save cable installation time
  •  
  •  
  • Specifications:
    • Overall dimensions: 180 x 80 x 40mm
    • Power supply: 4 x 1.5V size AA batteries with power consumption of 16mA
    • Display: special 4 x 16 characters big screen LCD lattice (valid in visual field of 61.6 x 25.5mm)
    • Type of test cable: STP/UTP twin twisted cable, coaxial cable, and telephone line
    • Working ambient temperatures: -10 to 60°C
    • Tester port: RJ45 master port (M), loop back RJ45 port (L), and far-end recognizer RJ45 port (R), the extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
    • Length measurement of twin twisted cable:
      • Scope: 1,350m (31,200ft)
      • Calibration accuracy: 3% (±0.5m or ±.5ft), (calibrating cable: ≥5m)
      • Shipment accuracy: 5% (±0.5m or ±1.5ft), (AMP, AT&T class 5 cable)
      • Display: m or ft
    • Length calibration:
      • User can set calibration factor by himself with a given length cable
      • The length of calibrating cable is more than 5m
    • Wire sequence and locating cable error:
      • Check errors such as open-circuit, short-circuit, reverse connection, crossover or cross talk interference
    • Locating cable: eight far-end passive test jacks (ID 1 ≥ ID 8)
    • Automatic time delay shut off time
    • The tester does not operate for 30 minutes