- Worldwide 2.4GHz ISM band operation
- Up to 2 Mbps on-air data rate
- Ultra low power operation and advanced power management
- 11.3mA peak TX current at 0dB output power
- 13.5mA peak RX current at 2 Mbps air data rate
- 900nA in power down mode
- On chip voltage regulator, 1.9 to 3.6V supply range
- Enhanced ShockBurstTM hardware link layer
- Automatic packet assembly (Preamble, Address and CRC)
- Dynamic payload length
- Selective auto acknowledgment with payload
- Auto retransmit
- 6 data pipe MultiCeiverTM
- Fully air compatible with Nordic nRF2401A, 02, E1 and E2 at 1 Mbps and 250 kbps air data rates
- Low cost external ± 60ppm 16MHz crystal
- 5V tolerant inputs
- Low cost chip inductors
- Compact 20-pin 4x4mm QFN package

BENEFITS
- A true ultra low power solution enabled by a unique combination of low active mode currents, advanced power management and high air data rate
- A low cost solution is enabled by high level of integration with a minimum number of low cost external components

APPLICATIONS
- Wireless PC peripherals
- Mice, keyboards and remotes
- 3-in-one desktop bundles
- Advanced Media center remote controls
- VoIP headsets
- Game controllers
- Sports watches and sensors
- RF remote controls for consumer electronics
- Home and commercial automation
- Ultra low power sensor networks
- Active RFID
- Asset tracing systems
- Toys

GENERAL DESCRIPTION
Ultra low power, compact and low cost 2.4GHz transceiver
The nRF24L01+
The nRF24L01 is a unique wireless solution for compact, battery operated applications with stringent requirements on battery lifetime and cost. The transceiver operates in the license free worldwide 2.4GHz ISM band.

It is specifically designed for two types of application: PC peripherals and ultra low power applications such as sports and wellness sensors. For PC peripherals such as wireless mice, keyboards and media center remotes it enables high performance and long battery life at a low solution cost. For sensor applications the ultra low power consumption and advanced power management enables battery lifetimes up to several years on a coin cell battery.

Smooth transition from nRF24L01:
Improved co-existence performance and longer range
The nRF24L01+ is mechanically, functional and electrical drop in compatible with the nRF24L01. In addition it offers significant improvements on co-existence performance with wide band inference sources like WiFi compared to nRF24L01. It also adds a 250 kbps air-data rate mode offering -94dBm sensitivity for longer range operation.

Compact, highly integrated low cost solution:
Compact 4x4mm package, low cost external BOM
The nRF24L01+ integrates a complete 2.4GHz RF transceiver, an RF synthesizer, and full baseband logic including the unique Enhanced ShockBurst" hardware link layer, advanced power management and a high-speed SPI for the host controller interface. No external loop filters, resonators or VCO varactor diodes are required, only a low cost ± 60ppm 16MHz crystal, matching circuitry and the antenna.

Ultra low power consumption:
A unique combination of high air data rate and advanced power management the nRF24L01+ has a unique combination of four features that enable the implementation of ultra-low power wireless connectivity:
- Sub 13mA TX and RX active currents that permit coin-cell battery operation
- Advanced power management with power saving idle modes combined with rapid active mode start-up from idle
- High 2 Mbps on-air data rate that allows the transceiver to minimize the time it spends in the relatively more power consuming active mode for a given effective data rate
- Enhanced ShockBurstTM link layer minimizes processing load on the host microcontroller reducing average current consumption