| Material Grade |
ISO Grade |
Density(g/cm3)≥ |
Hardness(HRA)≥ |
Bending strength(N/mm3)≥ |
Application |
| YT05 |
P05 |
12.5-12.9 |
≥ 92.5 |
≥ 1080 |
Suitable for using in processing of hardened steel and high intension steel. |
| YT15 |
P10 |
11-11.7 |
≥ 91 |
≥ 1130 |
Suitable for continuous and discontinuous fine cymbals and coarse and fine enlarge of carbon steel and alloy steel. |
| YT14 |
P20 |
11.2-12 |
≥ 90.5 |
≥ 1180 |
Suitable for carbon steel, alloy steel processing, un-smooth section continuous coarse car, discontinuous fine and section coarse cymbals, core hole, coarse enlarge. |
| YT5 |
P30 |
12.5-13.2 |
≥ 89.5 |
≥ 1370 |
Suitable for carbon, coarse cutting, half fine cutting and coarse cymbals and drilling when processing unsmooth section discontinuous cutting of carbon steel, alloy steel. |
| YW1 |
M10 |
12.6-3.5 |
≥ 91.5 |
≥ 1180 |
Suitable for processing of refractory steel, timang, stainless steel, and common steel and cast iron. |
| YW2 |
M20 |
12.4-13.5 |
≥ 90.5 |
≥ 1320 |
Suitable for processing of refractory steel, timang, stainless steel, and common steel and cast iron. |
| YW3 |
M10 M29 |
12.7-3.3 |
≥ 92 |
≥ 1270 |
Suitable for half fine processing of alloy steel and high intensive steel; Coarse processing under small impulse force. |
| YW4 |
M10 P10 |
12-12.5 |
≥ 92 |
≥ 1230 |
Suitable for fine processing of stainless steel. |
| YG6X |
K10 |
14.7-15.1 |
≥ 91 |
≥ 1370 |
Suitable for coast and fine processing of cast iron, ball ink cast iron. |
| YG6 |
K20 |
14.6-15 |
≥ 89.5 |
≥ 1420 |
Suitable for continuous cutting and coast car rib and core hole fine enlarge of cast iron and un alloy material. |
| YG8 |
K30 |
14.5-14.9 |
≥ 89 |
≥ 1470 |
Suitable for discontinuous cutting and cutting cymbals of cast iron, ball ink cast iron, white iron. |
| YG11C |
K40 |
14-14.4 |
≥ 87 |
≥ 1670 |
Suitable for impulse turning charge rock head, drilling middle hard and hardness stone. |
| K14 |
K20 |
14.8-15 |
≥ 89.5 |
≥ 1400 |
Suitable for fin processing of cast iron and forged steel. |
| YG20 |
K50 |
13.4-13.6 |
≥ 85 |
≥ 2640 |
Suitable for fine processing of cast iron and forged steel. |
| KD20 |
K35 |
14.3-14.5 |
≥ 86.5 |
≥ 2450 |
Suitable fine processing of cast iron and forged steel. |
| KD14 |
K30 |
14.8-14.9 |
≥ 389.5 |
≥ 2750 |
Suitable fine processing of cast iron and forged steel.
|
