Dilution rate: Dilute with water from 0% to 20%. Mix thoroughly after use.

Dry time: Surface dry time 2 hours at 25 degrees centigrade.

Recoat interval: 2 hours minimum (at 25 degrees centigrade)

Painting Envioroment: Temperature between 5-40 degrees centigrade, relative humidity less than 85%.
Application Tools: Brush, Roller, and Spray

Notes for use

1.         Mix thoroughly before use. Dilute with water according to the instruction

2.         Application envioronment must be ventilated. Alkali resistance seal primer must be applied to the new wall firt to aovid basification or color shading.

3.         When the basement uses alkyd mixed with putty, seal primer can only be applied when the putty is completely dried to aovid of yellowing issue.

4.         Do not applied together with oil paint like polyester paint, floor paint in order to avoid of yellowing issue on the wall surface.

5.         Walls that are close to water source or high humidity area like kitchen and toliet must applied with water proof operation. Otherwise both sides of the wall are tend to be mildewy.

6.         Stop application when the base material temperature is lower than 5 degrees centigrade, and the envioronment humidity is more than 85%. Dilute the paint with less water in winter or low temperature season.

7.         For the dark color or bright color latex paint, primier is required and the dilute rate must be within 10%. It’s better to do several coats to avoid of color floating and seeing through.

8.         Thinned paint should not be poured back to the original can.

9.         During application interval or when the application is done, clean all equipment with clean water and soap immediately.

10.      Store in cool, dry and good ventilated place, with lid tightly closed.