DeviceNet

P/N: Ci-df120-m 

Multimode fiber 2KM, dual fiber ports, connector ST/SC/FC, Max Rate data: 500K

-----------------------------------------------------------------------------------------------------------------------------------------------------

Description:
The Ci-df120 series is designed for use in optical DeviceNet fieldbus networks. Feature with data rate up to 500K,35mm DIN rail mounting, redundancy power input(9V~30VDC),relay output alarm.
Ci-df120 contains two fiber optic transceivers one electrical interface. The repeaters provide fiber optic connection in point to point, star, daisy chain topologies networks.

-----------------------------------------------------------------------------------------------------------------------------------------------------

Specification:

Electrical interface

• Signal type: DeviceNet fieldbus
• Data Rate: 0~500K

Data Rate Vs Cable Length charts:

• Wire Cable Connection: 5-pin Pl able Screw Terminal
• Wire End Termination: None 

Optical interface

• Wave length: 850nm,1310 nm,1550nm
• Fiber type: multi mode 50/125 um,62.5/125 um,100/140um;single mode 8.3/125 um,9/125um,10/125um
• Transmission distance: MM 2Km,SM 20Km
• Fiber interface type: ST

Relay

• Contact rating:DC30V@1A Max
• Fiber link fault and No voltage input alarm
• 5-pin Pl able Screw Terminal

Power

• Input Voltage: 24VDC(9VDC~30VDC)
• 5-pin Pl able Screw Terminal
• Support dual power backup
• Consumption:24VDC@60mA

Mechanical

• Dimensions: 136mm×52mm×105mm (H×W×D)
• Casing: IP30 protection, Metal case
• Installation: 35mmDIN-Rail, Wall Mounting
• Weight :800g

Environmental

• Operating Temperature: 0 to 70°C (-40°C to85°C optional)
• Storage Temperature: -45°C to 85°C
• Ambient Relative Humidity: 10 to 95% (non-condensing)