Description:

Parameters
- Interface Parameter: eight RS232 signals; two card reader signals (passive); one fire alarm signal
- Composition: mechanism; housing; gate control board; power supply
- Structure: frame / stainless steel / cold roller steel plate
- Turning Direction of Gate: single-directional / bi-directional
- Protection: in order to protect the mechanism, the tripod will move and reset automatically when external force is over setting value (40KGS).
- Driver Mode: direct-current
- Anti-reversal function can be assured one card one people
- Power: AC220V + 10%; 50HZ + 4%
- Output: AC24V; DC12V; DC5V
- Consumption: Static: single channel 40W; Working status: single channel 120W
- Working Environment: indoor; outdoor (need rain-proof frame)
- Temperature: -10 degree ~ 60 degree
- Humidity: 5%~95%
- Speed: >15people /minute
- Noise: less than 50DB
- Lane Width: 600mm
- Maintenance: two
- Service Life: 5millions continuous opening and closing
- Overall Dimensions: L x W x H 3000 x 1460 x 2000 (mm)
- Net Weight: 120KGS (not including control device)
- Protection Grade: IP42

Features
- The gate will be kept open when the infrared detectors indicated person who did not pass.
- If the people in the channel after read the card, but the fingerprint identification did not pass, then the second gate won’t be open, while alarm will be indicated someone is trespass till the fault has been ruled out. Using pure electric mechanism, uniform rotation.
- ID, IC, barcode, handset RFID-SIM code, handset two-dimensional code, biological identification code and other card reader device.
- Able to prevent pushing the glass at the opposite direction. The glass will be locked and reset automatically when it was pulled in the opposite direction.
- The gate will be operated automatically after read the card and pushed little angle.
- Motor rotation and glass reset by photodetector.
- Microprocessor signal processing, rotation smoothly, reliable performance.
- As microprocessor core of module electrical control system, to achieve the intelligent management.
- Accomplished remote control through computer management.
- Unique geared motor, ribbed belt variable transmission and reset device coded electronic control.
- Statistics and indication automatically.
- Able to operate through networking, and working offline.
Main Application
Use to high security rank places, such as custom, border, airport, government agency, etc…

2. A- TD301 One Rod Turnstile

Parameters
- Interface parameters: one RS232 interface; two card reader signals (passive); one fire alarm signal
- Material: 304 stainless steel
- Power: AC220+ 10%, 50HZ
- Driver Mode: DC24V / 100W
- Temperature of Working Environment: -15 degree~60 degree
- Humidity: 90%,
- Length of Gate Rod: 450mm
- Opening and Closing time: 1 second
- Service Life: 5 millions continuous rotation
- Overall Dimensions: 1400L x 200W x 1040H (mm)
- Weight: 80KGS
- Rotation of Gate: single-directional, bi-directional (optional)
- Working Environment: indoor, outdoor (need rain-proof frame)
- Protection Grade: IP42

Features
- Self-inspection of fault and alarm indication function, convenient for maintenance and usage.
- The rod is automatic fall when power is off and self-inspection when the electricity is on and automatic recovery to the locked status.
- Various kinds of working modes which can be optional, such as bi-directional card reader; read card at one side while forbidden passing on the opposite side; read card at one side while allow passing on other side; passing through infrared sensor in single and bi-directional way, the rod will be lifted and fall the gate will be closed when detected the person is passed. And the working mode of gate is setting through main menu.
- The infrared sensor detected the pedestrian who read valid card has passed, it will be lifted the rod and closed the gate automatically or delay lift and fall after the pedestrian has passed, able to delayed 1~60 seconds which can be set through the main menu.
- Able to reset automatically. If the pedestrian read the card but did not pass in the specified time, the system will be cancelled the passing rights of this time. The limited time of passing can be set by administrator.
- If pedestrian forgot or read invalid cad, forbidden to pass and alarm till the pedestrian quit the channel of turnstile. Allow passing after re-read valid card.
- In order to meet clients’ special requirement and fire safety requirement, the port of communicate interface 485 can be controlled the lifting and falling of rod at long distance.
- Prevent rush function, the rod of the gate will be locked when it hasn’t got the open signal.
- Double anti-pinch function - infrared sensor and machine.
- Unified and Standard external electric interface can be connected with various kinds of read and write device, convenient for system integration, and able to accomplished remote control through computer management.
- Able to statistics the numbers of pedestrian on passing direction, and show it to the administrator as the manner of LED (optional)
- Memory card reader and non-memory card reader, user can be set according to their own needs.
- Able to limit the numbers of the inner worker through setting the software, to meet some special requirements in special place.
- Operating smoothly, low noise.

Main Application

- Apply to control flow of single or bi-directional entrance and exit channel.
- The entrance and exit channel of station, pier and tourist attractions.
- The ticket checking channel of exhibition, swimming stadium.
- Access control of entrance and exit channel of office buildings, hotels, enterprises.
- Able to control special channel.