Application :
1 .500 meters between the main engine and the sensors .
2.DC and AC can be selected
3.you can remote control setting up the parameter , installed conveniently
4.Supply the high or low switch signal , RS485 output .
5. preventing Disturbance well
6.Airtight structure , No Corrosion .
Specification
1 .Resolution 1mm/1cm
2.Measuring error : 0.2%( full range)
3.Display : Two lines ,14 letters,LCD Display (back light )
4.Signal output : DC 4-20mA RS485
5.Outpot load : 0-500Ω
6.Relay output : higher alarm /lower alarm
7.Relay mode : always open
8.relay quatity: 2 or 4
9,relay specification : 5A 250VAC /30VDC
10 RS485 standard level
11.power supply : HLMLD : DC24V (±10%) 0.1 A
HLMLA: AC220V(±20%) 0.1 A
|