Function Specifications

1.Fit for lamps with various kinds of bases (E27\E14\ GU10\ MR16 \MR11\ T5 \T8\T10).

2.Multiple voltage output(AC220V/DC24V/DC12V),which is fit for all ceiling lights, strips and tube light testing and displaying.

3.Current/ Voltage/ Power digital displaying, read all parameters directly by naked eyes.

4.LED color display and CCT comparison

5.Fit for SCR dimmable lamps testing and displaying, showing dimmering effect easily.

 Attentions

1.Do not drop any water or liquid into the case, in casing of short circuit or other malfunction.

2.Do not touch the metal parts in the case directly in case of electricity shock.

3.Do not over load on DC12V, should be less than 36W

4.Do not over load on DC24V, should be less than 48W

5.Do cut off the main power immediately in case there is any problems on our products, then please pack well and send to the dealer for repair or maintenance.

6.Do not use the products if the power cable is broken, or the products fall off unintentionally ,please pack well and send to the dealer for repair or maintenance.

 Maintenance

1.Replace the fuse if fuse blown because of short circuit.

2.Choose the right function for dimmer and non-dimmer.

3.Do not disassemble the case if not manufacturer.

4.Do cut off the main power and keep clean if not on use.

5.Wide range of voltage input, the case will show the on-time input voltage.

Technical Parameters

A.C.Voltmeter:AC300V     A.C.Ampere meter:AC2A

D.C.Voltmeter:DC50V      D.C.Ampere meter:DC5A

Switch 1:DC12V /3A        Switch 2:DC24V/2A

Power meter:AC220V/10A