Our GCS series low voltage draw-out switchgear is suitable for 4000A low voltage system

 

l         The frame of the cabinet selects tee bend connection of 8MF cross-sectional material (modulus: E=20mm), which is assembled after fastened by locking screws and high strength screws.

l         The cabinet body is made of cold rolled steel and import A-zinc alloy plates.

l         Cabinet front

a. transparent glass door 

b. ordinary door plate

c. draw-out pane

d. ventilation door

l         Cabinet back

a.         back open

b.         sealing board at the back of the cabinet installed by the wall, fixed by the screws directly

l         Cabinet side: the side board fixed by the screws

l         The roof of the cabinet

a.      Roof cover (with ventilation holes, match respective bushing according to the cable size when wiring).

l         The bottom of the cabinet: bottom covers (match respective bushing according to the cable size).

l         There are integrated isolating boards among the cabinets.